High Pressure Factory Sales HDPE 200mm Water Pipe Fusion Welding
Machine Price List SHT200-2/4(A)
The main body supports and center the plastic pipes with two fixed
and two movable clamps. The machine should be operated on a dry
area. The protective measures should be adopted when it's used in
rain or on wet ground.
Manually Operated HDPE butt fusion welding machine is suitable for
PE and PP pipes and fittings. High quality design and construction
provides an excellent machine for welding both on the worksite and
in the factory. The use of high quality Aluminum casting allows for
lower weight without compromising strength and performance.
Butt Fushion Welding Machine Technical data:
| item | SHT160
-2/4(A) | SHT200
-2/4(A) | SHT250-2/4(A) |
| Working Range | 63-160mm | 63-200mm | 90-250mm |
| Caliber (mm) | 63, 75, 90, 110, 125, 140, 160 | 63, 75, 90, 110, 125, 140, 160, 180, 200 | 90, 110, 125, 140, 160, 180, 200, 225, 250 |
| Heating board max temp. | 270 °C | 270 °C | 270 °C |
| Temperature bias | “+/-5° | “+/-5° | *+/-5°C |
| Heating plate power | 1.6 Kw | 1.8 Kw | 2.2 Kw |
| Power of Heating plate: | 0.8 Kw | 0.8 Kw/1.2Kw | 1.45Kw/2.2Kw |
| Total power | 2.4 Kw | 2.6 Kw/3.2Kw | 3.65Kw/4.7 Kw |
| 2(A) G.W./N.W.: | 35/32 kgs | 50/44 kgs | 83/70kg |
| 2(A) Packing size: | 55*47*52 cm | 67*47*53 cm | 76*55*58 cm |
| 4(A) G.W./N.W.: | 47/42 kgs | 52/46 kgs | 110/95kg |
| 4(A) Packing size: | 68*54*53 cm | 74*59*56 cm | 90*67*54 cm |
Other name:
hydraulic fusion machine
hydraulic butt welding machine
63-200MM Plastic Fusion Welder Hydraulic Ppr Pipe Welding Machine
Hdpe Butt Fusion Welding Machine
automatic butt fusion machine equipment welding plastic pipe
Features:
During electric welding, if the movable chuck and the fixed chuck
collide, it is not necessary to use the main gate of the welding
machine to shut down, only move the work The pressure adjustment
lever can open the chuck. High- accurate and shockproof pressure
meter indicates clearer readings.
Preparation for welding HDPE Pipe manual Butt Fusion Welding Machine
1. Before operation, all equipment parts shall be placed on a
stable and dry place.
2. Confirm that the power supply used meets the requirements of the
equipment, the equipment is in good condition, and the electrical
circuit is not damaged; the detection indicator works normally, the
milling cutter blade is sharp, and the parts and operating tools
are complete.
3. Replace the required fixture according to the outer diameter of
the welded pipe.
Welding procedure for HDPE PIPE manual Butt Fusion Welding Machine
Application
Our service:
1) We offer 1 year warranty and free spare parts. (Except for
wearing parts)
2) We offer voltage and frequency of motor customization service,
such as 110v 60hz.
3) We can put your LOGO on machine plate or packing (need your
authorization on brand)
4) Machine can be shipped to overseas or domestic place by sea or
air in LCL or FCL.
